FN Archimer Export Format
PT J
TI Analysis of the moisture effect on the mechanical behaviour of an adhesively bonded joint under proportional multi-axial loads
BT 
AF ARNAUD, N.
   CREAC'HCADEC, R.
   COGNARD, J. Y.
   DAVIES, Peter
   LE GAC, Pierre-Yves
AS 1:1;2:1;3:1;4:2;5:2;
FF 1:;2:;3:;4:PDG-REM-RDT-LCSM;5:PDG-REM-RDT-LCSM;
C1 Univ Brest, Lab Brestois Mecan & Syst, ENSTA Bretagne, EA4325,ENIB,UEB, F-29806 Brest, France.
   IFREMER, Mat & Struct Grp, Ctr Brest, F-29280 Plouzane, France.
C2 UBO, FRANCE
   IFREMER, FRANCE
SI BREST
SE PDG-REM-RDT-LCSM
IN WOS Ifremer jusqu'en 2018
   copubli-france
   copubli-univ-france
IF 0.863
TC 3
UR https://archimer.ifremer.fr/doc/00277/38788/37557.pdf
LA English
DT Article
DE ;water resistance;Arcan test;ageing;epoxides;finite-element stress analysis;durability
AB The objective of the study is to identify the 3D behaviour of an adhesive in an assembly, and to take into account the effect of ageing in a marine environment. To that end, three different tests were employed. Gravimetric analyses were used to determine the water diffusion kinetics in the adhesive. Bulk tensile tests were performed to highlight the effects of humid ageing on the adhesive behaviour. Modified Arcan tests were performed for several ageing times to obtain the experimental database which was necessary to identify constitutive models. A Mahnken-Schlimmer type model was determined for the unaged state according to a procedure developed in a previous study. This identification used inverse techniques. It was based on the unaged modified Arcan results and on a coupling between an optimisation routine and finite-element analysis. Then, a global inverse identification procedure was developed. Its aim was to relate the unaged parameters to the moisture concentration and overcome the difficulties usually associated with ageing of bonded assemblies in a humid environment: a non-uniformity of the stress state and a gradient of mechanical properties in the adhesive. This procedure was similar to the one used in the first part but needed modified Arcan results for several ageing times. It also required an initial assumption for the evolution of the Mahnken-Schlimmer parameters with the moisture concentration.
PY 2015
PD NOV
SO Journal Of Adhesion Science And Technology
SN 0169-4243
PU Taylor & Francis Ltd
VL 29
IS 21
UT 000359705900006
BP 2355
EP 2380
DI 10.1080/01694243.2015.1067018
ID 38788
ER

EF